Root Zanli
Home
Console
Upload
information
Create File
Create Folder
About
Tools
:
/
usr
/
lib
/
python3.9
/
site-packages
/
serial
/
urlhandler
/
Filename :
protocol_loop.py
back
Copy
#! python # # This module implements a loop back connection receiving itself what it sent. # # The purpose of this module is.. well... You can run the unit tests with it. # and it was so easy to implement ;-) # # This file is part of pySerial. https://github.com/pyserial/pyserial # (C) 2001-2015 Chris Liechti <cliechti@gmx.net> # # SPDX-License-Identifier: BSD-3-Clause # # URL format: loop://[option[/option...]] # options: # - "debug" print diagnostic messages import logging import numbers import time try: import urlparse except ImportError: import urllib.parse as urlparse try: import queue except ImportError: import Queue as queue from serial.serialutil import SerialBase, SerialException, to_bytes, iterbytes, writeTimeoutError, portNotOpenError # map log level names to constants. used in from_url() LOGGER_LEVELS = { 'debug': logging.DEBUG, 'info': logging.INFO, 'warning': logging.WARNING, 'error': logging.ERROR, } class Serial(SerialBase): """Serial port implementation that simulates a loop back connection in plain software.""" BAUDRATES = (50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, 9600, 19200, 38400, 57600, 115200) def __init__(self, *args, **kwargs): self.buffer_size = 4096 self.queue = None self.logger = None self._cancel_write = False super(Serial, self).__init__(*args, **kwargs) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self.is_open: raise SerialException("Port is already open.") self.logger = None self.queue = queue.Queue(self.buffer_size) if self._port is None: raise SerialException("Port must be configured before it can be used.") # not that there is anything to open, but the function applies the # options found in the URL self.from_url(self.port) # not that there anything to configure... self._reconfigure_port() # all things set up get, now a clean start self.is_open = True if not self._dsrdtr: self._update_dtr_state() if not self._rtscts: self._update_rts_state() self.reset_input_buffer() self.reset_output_buffer() def close(self): if self.is_open: self.is_open = False try: self.queue.put_nowait(None) except queue.Full: pass super(Serial, self).close() def _reconfigure_port(self): """\ Set communication parameters on opened port. For the loop:// protocol all settings are ignored! """ # not that's it of any real use, but it helps in the unit tests if not isinstance(self._baudrate, numbers.Integral) or not 0 < self._baudrate < 2 ** 32: raise ValueError("invalid baudrate: {!r}".format(self._baudrate)) if self.logger: self.logger.info('_reconfigure_port()') def from_url(self, url): """extract host and port from an URL string""" parts = urlparse.urlsplit(url) if parts.scheme != "loop": raise SerialException( 'expected a string in the form ' '"loop://[?logging={debug|info|warning|error}]": not starting ' 'with loop:// ({!r})'.format(parts.scheme)) try: # process options now, directly altering self for option, values in urlparse.parse_qs(parts.query, True).items(): if option == 'logging': logging.basicConfig() # XXX is that good to call it here? self.logger = logging.getLogger('pySerial.loop') self.logger.setLevel(LOGGER_LEVELS[values[0]]) self.logger.debug('enabled logging') else: raise ValueError('unknown option: {!r}'.format(option)) except ValueError as e: raise SerialException( 'expected a string in the form ' '"loop://[?logging={debug|info|warning|error}]": {}'.format(e)) # - - - - - - - - - - - - - - - - - - - - - - - - @property def in_waiting(self): """Return the number of bytes currently in the input buffer.""" if not self.is_open: raise portNotOpenError if self.logger: # attention the logged value can differ from return value in # threaded environments... self.logger.debug('in_waiting -> {:d}'.format(self.queue.qsize())) return self.queue.qsize() def read(self, size=1): """\ Read size bytes from the serial port. If a timeout is set it may return less characters as requested. With no timeout it will block until the requested number of bytes is read. """ if not self.is_open: raise portNotOpenError if self._timeout is not None and self._timeout != 0: timeout = time.time() + self._timeout else: timeout = None data = bytearray() while size > 0 and self.is_open: try: b = self.queue.get(timeout=self._timeout) # XXX inter char timeout except queue.Empty: if self._timeout == 0: break else: if b is not None: data += b size -= 1 else: break # check for timeout now, after data has been read. # useful for timeout = 0 (non blocking) read if timeout and time.time() > timeout: if self.logger: self.logger.info('read timeout') break return bytes(data) def cancel_read(self): self.queue.put_nowait(None) def cancel_write(self): self._cancel_write = True def write(self, data): """\ Output the given byte string over the serial port. Can block if the connection is blocked. May raise SerialException if the connection is closed. """ self._cancel_write = False if not self.is_open: raise portNotOpenError data = to_bytes(data) # calculate aprox time that would be used to send the data time_used_to_send = 10.0 * len(data) / self._baudrate # when a write timeout is configured check if we would be successful # (not sending anything, not even the part that would have time) if self._write_timeout is not None and time_used_to_send > self._write_timeout: # must wait so that unit test succeeds time_left = self._write_timeout while time_left > 0 and not self._cancel_write: time.sleep(min(time_left, 0.5)) time_left -= 0.5 if self._cancel_write: return 0 # XXX raise writeTimeoutError for byte in iterbytes(data): self.queue.put(byte, timeout=self._write_timeout) return len(data) def reset_input_buffer(self): """Clear input buffer, discarding all that is in the buffer.""" if not self.is_open: raise portNotOpenError if self.logger: self.logger.info('reset_input_buffer()') try: while self.queue.qsize(): self.queue.get_nowait() except queue.Empty: pass def reset_output_buffer(self): """\ Clear output buffer, aborting the current output and discarding all that is in the buffer. """ if not self.is_open: raise portNotOpenError if self.logger: self.logger.info('reset_output_buffer()') try: while self.queue.qsize(): self.queue.get_nowait() except queue.Empty: pass def _update_break_state(self): """\ Set break: Controls TXD. When active, to transmitting is possible. """ if self.logger: self.logger.info('_update_break_state({!r})'.format(self._break_state)) def _update_rts_state(self): """Set terminal status line: Request To Send""" if self.logger: self.logger.info('_update_rts_state({!r}) -> state of CTS'.format(self._rts_state)) def _update_dtr_state(self): """Set terminal status line: Data Terminal Ready""" if self.logger: self.logger.info('_update_dtr_state({!r}) -> state of DSR'.format(self._dtr_state)) @property def cts(self): """Read terminal status line: Clear To Send""" if not self.is_open: raise portNotOpenError if self.logger: self.logger.info('CTS -> state of RTS ({!r})'.format(self._rts_state)) return self._rts_state @property def dsr(self): """Read terminal status line: Data Set Ready""" if self.logger: self.logger.info('DSR -> state of DTR ({!r})'.format(self._dtr_state)) return self._dtr_state @property def ri(self): """Read terminal status line: Ring Indicator""" if not self.is_open: raise portNotOpenError if self.logger: self.logger.info('returning dummy for RI') return False @property def cd(self): """Read terminal status line: Carrier Detect""" if not self.is_open: raise portNotOpenError if self.logger: self.logger.info('returning dummy for CD') return True # - - - platform specific - - - # None so far # simple client test if __name__ == '__main__': import sys s = Serial('loop://') sys.stdout.write('{}\n'.format(s)) sys.stdout.write("write...\n") s.write("hello\n") s.flush() sys.stdout.write("read: {!r}\n".format(s.read(5))) s.close()